Your LED costumes and props are a unique and eye-catching addition to any performance or event. To ensure that they last for many years to come, it is important to handle them with care. Here are some tips for keeping your LED costumes and props in top condition:
Care
- Avoid harsh chemicals: Keep your LED costumes and props away from any harsh chemicals, such as bleach, gasoline, or acetone. These chemicals can damage the reflective materials and electronics in your costumes.
- Hand wash with mild soap for water-resistant costumes: If your costumes or props are water-resistant, you can gently wash a section of the costume or prop with mild soap and water. Do not submerge the entire prop into water.
- Dry clean for non-water-resistant costumes: Ideally, non-water-resistant LED costumes should be dry-cleaned to prevent damage from water.
- Remove odor with vodka solution: To remove odor from your LED costumes, consider using a solution of vodka and water. Mix 1 part vodka with 3 parts water, and spray the solution directly onto the costume. Allow it to air dry completely. (For a more detailed explanation on using a vodka solution to remove odor from costumes, please refer to this article: [Link to article])
- Do not put in the dryer: Do not put your LED costumes or props in the dryer. The heat can damage the reflective materials and electronics.
- Air dry flat or on a hanger: After washing or dry cleaning, air dry your LED costumes or props flat or on a hanger. Avoid excessive bending or folding, as this can put stress on the seams and LEDs.
- Store in a cool, dry place: Store your LED costumes and props in a cool, dry place away from direct sunlight and heat sources. This will help to prolong the life of the materials and electronics.
Storage
- Turn off LEDs: Before storing your LED costumes or props, turn off the LEDs. To turn off the LEDs on your costume or prop, press and hold any button of the LED controller for 2 seconds, and then release it. After that, you can disconnect the batteries.
- Remove batteries: If your costumes or props have batteries, remove them before storing them. This will help to prolong the life of the batteries.
- Store in a garment bag or storage box: When storing your LED costumes or props, use a garment bag or storage box that is specifically designed for delicate items. This will help to protect them from dust and dirt.
Remember, by following these care and storage guidelines, you can help to extend the life of your LED costumes and props, ensuring that they remain bright and vibrant for years to come.
Additional Tips
- Avoid using them in extreme temperatures.
- Avoid getting them wet: If your costumes or props get wet, dry them immediately with a soft cloth and let them fully dry. Do not use a hair dryer (for too long at least) on high heat, as this can damage the materials.
- Take care of the batteries: If your costumes or props use batteries, use high-quality batteries and store them properly when not in use. This will help to prolong the life of the batteries.
We hope these tips help you keep your LED costumes and props in tip-top shape. If you have any questions, please feel free to contact us.