How to check the charge of an 18650 battery?
Some chargers are able to show the battery charge. But it is not always clear and precise. We propose to use the universal method. For this, you will need a multimeter:
You need to set the voltage measurement mode with two signs after the point (20 V), connect the multimeter to the battery terminals. It doesn’t matter if the multimeter will show a positive or negative value, it is the voltage value (numbers) that matters:
For a charged battery, the voltage should be 3.9-4.3V
For a discharged battery, the voltage will be less than 3.4V
If the battery voltage is less than
2.5V, then the battery is in
deep discharge mode, and it is better to replace it.
With this method, you can measure the voltage without removing the batteries from the battery boxes (or batteries that cannot be removed), by simply applying the probes to the connector:


The photo shows batteries that will soon need to be charged
Related Articles
How to charge 18650 type batteries with Imax B6 charger or similar?
With the Imax B6 charger, you can charge the batteries without removing them from the battery boxes. Before charging, check that all battery boxes are completely filled with batteries: With Imax B6, you can charge batteries in two ways: Using a ...
What batteries are needed?
Our products use two types of rechargeable batteries: rechargeable batteries type 18650 rechargeable batteries type 14500 Rechargeable batteries type 18650 Flat-top batteries are recommended, but not required. Make sure the battery is 65 mm long, ...
How to insert batteries type 18650 properly?
On 18650 type batteries, there are usually no + and - signs, but despite this, the polarity of the battery is easy to determine. All 18650 batteries have a ring around the positive pole: Batteries must be inserted into battery boxes according to ...
What batteries are needed for a one-color corset?
Below you can find info regarding the batteries you will need: model- Li-pol 3S; voltage- 11.1V; capacity - the higher the capacity, the longer the dress will work; connector type- T-plug (in the USA it may be called Deans connector). Please pay ...
What should I do if my product is flashing red?
If your problem manifests itself in the same way as in the gif: First, you need to charge the batteries. This can be done using a charger suitable for the battery type used in the product. Our products use rechargeable batteries of the 18650 type or ...